fbpx

2018 Chris-Craft Launch 28

ID# 4109258

Ask A Question

CURRENT PRICE

$180,000

Yacht Overview

Make: Chris-Craft

Model: Launch 28

Year: 2018

Length: 30′

Located In: West Palm Beach, FL

Engine/Fuel Type: unleaded

Hull Material: Fiberglass

YW#: 8949021

Description

DEBBIE II is a gorgeous 2018 Chris-Craft Launch 30 with the rare blue over blue color scheme that will turn heads in every harbor. This model is well laid out for entertaining a crowd with plenty of luxurious seating, a roomy head nicely tucked away out of sight, and an easily convertible bimini top among her many other amenities. This particular vessel is lightly used, well maintained, and stored indoors so you will find her in extremely good shape.  Cosmetically her paint, canvas, stainless, and cushions all shine. While mechanically her systems are running well, engines serviced by Chris Craft last year, and all batteries replaced in 2023. She is easily seen in West Palm Beach.

  undefined Options and Standards

NOTABLE OPTIONS

  • Hull Color- Navy Blue- Painted
  • Volvo- Joystick with Active Trim
  • Color Contrast Stitching- Navy
  • Electric Drivers Helm Seat
  • Fender Clips (4)
  • Flooring- Woven Seagrass- Boucle
  • Garmin 741 XS GPS (7” Multifunction Display) with Sonar
  • Premium Audio System- Upgraded Fusion MSNRX300 with JL Speakers
  • Windlass with Anchor & Approx. 100’ Chain
  • Twin Mercury V8 6.2L (300 x 2HP) B3 DTS
  • Base Gelcoat- Ivory Blue
  • Gelcoat Stripe- Midnight Blue
  • Convertible Top-Navy
  • Black Teak Caulk
  • 110V
  • Heritage Trim Edition
  • Tecma Head System (Includes Dockside Pumpout)

STANDARD FEATURES

  • Mercury – Push Button Start
  • Teak Maintenance Kit
  • Teak Caulk Color Choice – Black or Blonde
  • Bow Scuff Plate – SS
  • Certifications and Standards – NMMA, ABYC, USCG
  • Deck Fill Plates – SS
  • Deck – Diamond Pattern Non-Skid, Fiberglass
  • Gunnel Trim Rubrail – Molded PVC w/SS Insert
  • Hardware – Bow and Stern Eyes, SS
  • Hardware – Bow Light Cover, SS
  • Hardware – Chrome Plated SS Fasteners
  • Hardware – Cleats, SS Mooring
  • Hardware – High-End Fit & Finish w/316L SS and Chris-Craft Logo
  • Hardware – Thru-Hull Fittings, SS
  • Hull – Chris-Craft Trademark Tumblehome Design
  • Hull – Deep-V Bottom w/Flared Bow
  • Hull – Deck Joint – Mechanically, Chemically Bonded
  • Ladder, swim platform – 3 step, SS, hidden
  • Lighting – Navigation Lights, SS and International Compliance
  • Logo – SS, Chris-Craft Branded
  • Ski Tow – Stainless Steel
  • Swim Platform – Integral
  • Swim Platform Grabhandle – Stainless Steel
  • Beverage Holders – Stainless Steel
  • Bolsters – Padded Gunwhale Mounted
  • Drains – Stainless Steel
  • Grabrails – Stainless Steel
  • Helm – binnacle mount controls
  • Helm – Compass, Dash Mounted
  • Helm – Dash, Gauge and Switch Panels w/Silver Perforated Panels
  • Helm – Dash Light Dimmer
  • Helm – Ignition Safety Switch
  • Helm – Model Designator, Stainless Steel
  • Helm – Steering Wheel, Mahogany
  • Helm – Steering, Tilt w/Power Assist
  • Helm – Stereo Remote, MP3/USB Inputs w/Fusion Bluetooth Enabled
  • Lighting – LED Courtesy
  • Outlets/Input – 12V Accessory Outlet(s)
  • Outlets/Input – USB Auxiliary Input
  • Speakers – JL Audio Sound System (*includes transom speakers)
  • Stereo System – Fusion, AM/FM/Bluetooth/USB w/amp and subwoofer
  • Upholstery Construction – High Density Foam with Antimicrobials and Open Cell Mesh for Drying
  • Windscreen – Curved Tempered Glass
  • Windscreen – Stainless Steel Frame
  • Battery Charger w/galvanic isolator
  • Battery Switch w/Breakers
  • Battery Tray(s)
  • Bilge Pump – highwater w/autofloat Switch
  • Bilge Pump – w/Autofloat System
  • Electric Wiring – Color Coded and Numbered w/Duetch Connectors
  • Electric Wiring – tinned copper
  • Electrical Bonding System
  • Fuel System – EPA Compliant
  • Teak – Beverage Holder Accents
  • Teak – Cockpit Steps
  • Air Intakes – SS
  • Anchor – Bow Locker – w/Teak and Chris-Craft Logo Inlay
  • Hull – Stringer System and Liner, 1 Piece Fiberglass Foam Filled for Flotation and Noise Reduction
  • Top – Bimini canvas top w/Stainless Steel bows and color fast acrylic
  • Trim Tabs – Lenco
  • Ventilation Grates – SS
  • Door – Wind, Hinged, Folds to Deck in Bow Area
  • Helm – Depth Finder – LCD
  • Helm – Digital Gauge Package, Chris-Craft Branded
  • Helm – Engine Controls, Electronic Control – EVC/DTS/DEC
  • Helm – Horn, Electric Trumpet(s)
  • Seating – Aft Cockpit, Port and Starboard Rear Facing Sun Loungers
  • Seating – Aft U-Shaped
  • Seating – Forward, Circular w/Forward Facing Port and Starboard Lounges
  • Seating – Helm, Double Driver’s Side w/Flip-Up Bolster (*Electric Optional)
  • Seating – portside passenger, bucket w/integrated SS handrails, flip-up bolsters and mahogany inserts
  • Seating – Sunpad, Large Aft w/ Transom Walk-Over (*Includes Filler Pad)
  • Shower – Transom
  • Stowage – Aft Cockpit, Underseat
  • Stowage – aft deck compartments
  • Stowage – Bimini, Dedicated Under Engine Hatch
  • Stowage – Bow, Port and Starboard Recessed
  • Stowage – Coaming w/Beverage Holders
  • Stowage – Fender, Hidden
  • Stowage – In-Floor Ski/Rod
  • Stowage – Cooler, soft side with storage
  • Stowage – Port and Starboard Underseat
  • Corian solid surface counter tops
  • Bilge System – Electric w/Blowers
  • Engine Compartment Stowage
  • Engine Hatch – Emergency Lift w/Jumper Posts
  • Engine Hatch – w/Stailnless Steel  Hinges, Electric Rams
  • Engine Hatch Insulation – Acoustical Barrier, Silver Mylar
  • Fire Extinguish System – Automatic w/Manual Override
  • Fuel System – Aluminum Tanks w/Anti-Siphon Valves and Electric Sending Units
  • Pump – freshwater, pressurized
  • Water / Holding Tank Level Monitor – electric

 

Full Specs

Boat Name

Debbie II

Dimensions

LOA: 30
LWL: 23.08
Beam: 10 ft
Maximum Draft: 3 ft
Bridge Clearance: 4.5 ft
Dry Weight: 8,700 lb
Deadrise: 20 °

Engines

Engine Brand: Mercury
Engine Model: 6.2L Bravo III
Engine/Fuel Type: unleaded
Engine Power: 300|horsepower
Engine Type: Inboard/Outboard

Engine Brand: Mercury
Engine Model: 6.2L Bravo III
Engine/Fuel Type: unleaded
Engine Power: 300|horsepower
Engine Type: Inboard/Outboard

Tanks

Fresh Water Tanks: 1 (9 Gallon)
Fuel Tanks: 1 (142 Gallon)

Accommodations

Number of heads: 1

Steering System
Joystick Control
Manufacturer Provided Description

The wider Launch 30 includes generous fore and aft seating, with a double-wide captain’s chair that allows the driver to share the view. The bow pit wraps several passengers in comfort. At the stern is a wide platform with handy transom shower. A head with sink, including a holding tank and dockside pumpout, is tucked below. Powered by a thrust of horsepower and equipped with a larger fuel tank, the Launch 28 is made for extended cruising.


Standard Features
  • Teak Maintenance Kit
  • Teak Caulk Color Choice – black or blonde
  • 3 Yr - Chris Craft protection plan
  • 5 Yr - transferable hull/structural warranty
  • Bow Scuff Plate - SS
  • Certifications and Standards - NMMA, ABYC, USCG
  • Deck Fill Plates - SS
  • Deck - diamond pattern non-skid, fiberglass
  • Flag/Pennant - embroidered Chris Craft and US Flag kit w/SS magnetic pole and base
  • Color Selections - base gel, Ivory Cream
  • Color Selections - boot stripe - multiple color selections
  • Gunnel Trim Rubrail - molded PVC w/SS insert
  • Hardware - bow and stern eyes, SS
  • Hardware - bow light cover, SS
  • Hardware - chrome plated SS fasteners
  • Hardware - cleats, SS mooring
  • Hardware - high end fit n finish w/316L SS and Chris Craft logo
  • Hardware - thru-hull fittings, SS
  • Hatches - vacuum infused w/ SS shocks
  • Hull - Chris Craft trademark Tumblehome design
  • Hull - deep V bottom w/flared bow
  • Hull - deck joint - mechanically, chemically bonded
  • Lighting - navigation lights, SS and international compliance
  • Logo - SS, Chris Craft branded
  • Swim Ladder - 3 step, SS hidden
  • Swim Platform – integral
  • Swim Platform Grabhandle - SS
  • Beverage Holders - Stainless Steel
  • Bolsters - padded gunwhale mounted
  • Drains – SS
  • Fuel System - EPA compliant
  • Grabrails - SS
  • Helm - compass, dash mounted
  • Helm - dash, gauge and switch panels w/silver perforated panels
  • Helm - dash light dimmer
  • Helm - ignition safety switch(es)
  • Helm - model designator, SS
  • Helm - steering wheel, mahogany
  • Helm - steering, tilt w/power assist
  • Helm - stereo remote, MP3/USB inputs w/Fusion Bluetooth enabled
  • Ladder - Stainless Steel boarding
  • Lighting - LED courtesy
  • Outlets/Input - 12v accessory outlet(s)
  • Outlets/Input - USB auxiliary input
  • Speakers - JL Audio Sound System
  • Stereo System - Fusion, AM/FM/Bluetooth/USB
  • Stereo System - Premium upgrade with amp and subwoofer
  • Stowage - aft deck compartments
  • Upholstery Construction - high density foam with antimicrobials and open cell mesh for drying
  • Vinyl - heavy duty, stain/UV resistant
  • Vinyl - multiple design/color selections
  • Windscreen - curved tempered glass
  • Windscreen - Stainless Steel Frame
  • Battery Charger
  • Battery Switch w/breakers
  • Battery Tray(s)
  • Bilge Pump - w/autofloat System
  • Electric Wiring - color coded and numbered w/Duetch connectors
  • Electrical Bonding System

Standard Equipment
  • Teak - cockpit steps
  • Teak - beverage holder accents
  • Teak - engine walk-over