$322,000

Description

Sea Mi Amor is a perfect example of a very well maintained, low hour (430 hrs), Pursuit 325 Dual Console. She is loaded with factory options such as the “must have” Yamaha docking joystick and bow thruster, as well as the diesel Fischer Panda generator (under 85 hrs), Two factory installed A/C Units (Cabin/Helm) and the electric aft sunshade. She has been lovingly maintained by her knowledgeable owner and is ready for the family to enjoy. The twin Yamahas were just fully serviced at 400 hours.

Yamaha EXTENDED WARRANTY thru 3/31/23

Full Specs

Sea Mi Amor

Dimensions

LOA: 34.5
Beam: 10.83 ft
Displacement: 11,775 lb

Engines

Engine Brand: Yamaha
Engine Model: F300
Engine/Fuel Type: unleaded
Engine Power: 300|horsepower
Engine Type: Outboard

Engine Brand: Yamaha
Engine Model: F300
Engine/Fuel Type: unleaded
Engine Power: 300|horsepower
Engine Type: Outboard

Tanks

Fresh Water Tanks: 1 (30 Gallon)
Fuel Tanks: 1 (300 Gallon)
Holding Tanks: 1 (10 Gallon)

Accommodations

Number of heads: 1

• Navy Hull Color with Grey Bootstripe
• White Yamaha F300 Engines with Platinum Graphics
• Yamaha Docking Joystick
• Bow Thruster
• Garmin Autopilot
• Dual Garmin 7612 (1 XSV) GPS/MAP
• Radar with pedestal
• ACR LED Spotlight with Remote
• Underwater LED Lighting (3-Sea Blaze Quattro Spectrum)
• Bridge deck table with storage
• Forward Cockpit Sunshade (Stowable)
• Full storage covers (photos available upon request)

• Dual Garmin 7612 (1 XSV) GPS/MAP
• Radar with pedestal
• Garmin 11 VHF
• ACR LED Spotlight with Remote
• JL Audio Stereo and Speakers
• Underwater LED Lighting (3-Sea Blaze Quattro Spectrum)
• Ritchie Compass
• NEMA 2000 wiring

• Pursuit® Protection Plan: 5‐Year Hull and Deck Structural Warranty, 5‐Year Blister Free Warranty, 2‐Year Limited Warranty
• Pursuit Blue Gelcoat
• Hand Laminated Hull with Vinyl Ester Resin and Engineered Fabrics
• 5 Ply Resin Infused Composite Transom System with Patented Transom Reinforcement Grid
• Infused Fiberglass Structural Grid System with Molded Finish and Integrated Bilge Water Management System
• Foam Filled Structural Grid
• Bronze Thru Hull Fittings Below Water Line
• Chrome over Bronze Thru Hull Fittings Below the 7 Degree Heel Line
• Stainless Clad Composite Thru Hull Fittings Above the 7 Degree Heel Line
• Bronze Garboard Drain
• Trim Tabs, Lenco Electric with Auto-Retract
• Bow Eye, 5/8" 316L Stainless Steel
• Integrated Transom Platform Extensions Outboard of Engines
• Boarding Ladder, 4-Step Telescopic, Mounted in Hull Platform
• Anchor System, Integrally Molded Thru-Stem
• Horn, Electric, with Oval Stainless Steel Cover
• Bow Thruster, 3.0 HP (2.2 kW) with Group 31 AGM Battery, Switch and Fuse
• Dedicated Transducer Location
• Forward Hull Compartmentation with One 1100 GPH Bilge Pump with Automatic Float Switch

• Hull and Deck Joint Mechanically Fastened
• Rub Rail: High Density PVC with Solid 316L Stainless Steel Insert
• Molded One Piece Deck and Cockpit Liner with Non-Skid Pattern Area
• Flush Mounted Integral Anchor Locker with Fiberglass Lid including: Horizontal Anchor Windlass with Switch at Helm and Remote at Anchor Locker 316L Stainless Steel through Stem Anchor Roller with 8" Mooring Cleat and Chain Binder 22lb Stainless Steel Plow Style Anchor, Self-Righting Shackle and 200' Rode (1/2" 8 Plait including 10' of ¼" G4 Chain)
• Cleats, 316 Stainless Steel, 10" Pop Up (2) Stern, (4) Spring and (2) Bow
• Molded Recessed Hatches with Gaskets and 316L Stainless Steel Latches and Overboard Drain Tracks
• Molded Transom Walkthrough with Hinged Transom Door, 316L Stainless Steel Latch and Magnetic Catch
• Self-Draining Cockpit with Bronze Ball Valve at Hull Side
• Bow Grab Rail, 316L Stainless Steel
• Transom Grab Rails, 316L Stainless Steel, (port & starboard)
• Molded Non-Skid Steps in Splashwell for Athwartship Access
• Navigation Lights, LED, 2 mile
• Opening Port Light with Screen and Stainless Steel Frame

• Molded Fiberglass Aft Tilting Helm with Instrumentation Visor, Electronics Mounting Surface, Fold Out Fiberglass Footrest / Platform, and Safety Lanyard
• 316L Stainless Steel Steering Wheel with Control Knob and Non-Slip Grip on Sport Tilt Plus Helm
• 12V Panel with Illuminated Carling® Rocker Switches
• Single Windshield Wiper with Washer Control
• Compass
• Trim Tab Control Panel and Indicator
• Waterproof Stereo Remote with Full Function Display
• Glove Box Drawer with Dedicated Electronics Cover Storage
• One (1) 12V Outlet and Dual USB Charger
• Bow Thruster Joy Stick Control
• Helm Drink Holders (2) in Side Panel
• Helm Fire Extinguisher
• Yamaha® Command Link Plus Display
• Yamaha Docking Joystick

• Rod Holders (4), Stainless Steel, in Gunwale
• Lighted Oceana Blue 24 Gallon Recirculating Live Well
• Under Gunwale Rod Storage (starboard)
• Fish Boxes, Insulated, and Diaphragm Pumps with Overboard Discharge (port & starboard)
• Cockpit Tackle Center

• Custom Cockpit Upholstery with Dri-Fast Foam and Mesh Backing
• Molded Forward Bow Seating with Flip-down Armrests and Storage Below
• Port and Starboard Forward Coaming Boxes with Four (4) Drink Holder, Storage Keeper, 12V and USB Charger (One Side Only), Mid-Level Lighting, Stereo Remote and (2) Speakers
• Captain’s Chair with Foldable Armrests, Fore and Aft Adjustment with Storage Below
• Molded Bridge Lounge Seating (forward or aft facing) with Flip-down Armrest
• Pursuit Cockpit JL Audio Entertainment System: 12V Bluetooth® Compatible Stereo System, JL Speakers (7 Total, 4 in Hardtop, 2 in Bow, & Subwoofer), Amplifier and Zonal Remotes (3)
• Molded Entertainment Center with Sink, Hot/Cold Mixing Faucet, Trash Can, Drink Holders, Cutting Board and Hinged Fiberglass Lid and Door
• 12v, 2.3 cubic ft Stainless Steel Drawer Refrigerator with 3M Protective Film
• Molded Aft Facing Cockpit Seat with Storage Below
• Folding Transom Seat with Patented Adjusting Backrest
• Folding Seat (portside) Under Gunwale
• Folding Fiberglass Boarding Step (starboard)
• Custom Molded Cockpit Table with Dual Mounti