$529,000

Description

We are selling our 2023 demo model. This HammerCat 35 was launched in April 2023, we used it for the “International Tuna Masters” in Cape town, and then shipped it to Fort Lauderdale. 

Less than 100 hrs on the Mercury 400’s, just had the 100 hr service done 8/23. 

Hull 122 is set up for sport fishing with multiple fish finders, Cyclone “bird finding” radar, 2 x 19″ MFDs, autopilot, AIS, VHF, sea-chest and live bait well, carbon fiber Gemlux outriggers, electric reel outlets, parachute rod holder, side door, coffin box, 4 x self bailing 600 qts insulated fishboxes, rod holders everywhere, oversized carbon fiber hardtop, 5 x Llebroc seats, Rockford Fosgate sound-system with 3 amps, subwoofers and 8 loudspeakers, windlass / anchor, under water lights, swim  ladder,  glass windscreen with commercial wiper, 2 additional carbon fiber posts, tow eyes, no bottom paint, covers for seats and coffin box, 12V electric toilet / fresh water flush / holding tank, high pressure deck wash (salt or fresh water), removable marlin door and so much more!

Retail price new $577k , demo price $529k

Hammer Yachts, builders of the next generation of power catamarans: lightweight, efficient and fast. No need for quad engines, 2 x 400 HP power this cat over 55 mph top speed, cruise at 45mph. Epoxy composite construction  with carbon fiber hardtop.

Full Specs

Hull 122

Dimensions

LOA: 35
Beam: 12 ft

Engines

Tanks

Accommodations

Number of heads: 1

Hammer Yachts: builders of the next generation of power catamarans.

The HammerCat 35 is the ultimate modern center console power-catamaran, which can be configured as a sport fisher, family boat, dive boat or super yacht tender. 

The HammerCat 35 was designed specifically for the modern boater: sometimes you want to go fishing, sometimes you want to go diving and you surely want to bring your friends and family to the sandbar: we did not want to build yet another center-console-sport-fish-vessel, our focus was entirely on the experienced boater who will appreciate the HammerCat’s exceptional design and build features:

 -Fuel and operating cost make boating expensive: our hull design and construction technique are unique which results in exceptional fuel economy and range.

 -Twin engine set up on the HammerCat 35: Where other power catamarans use a “quad engine” set up on their similar sized models and they weight up to 16,000 Lbs. The HammerCat 35 is build out of epoxy with vacuum fused e-glass, resulting in the “wet weight” of the HammerCat 35 at 8,500 Lbs. This means that we can use half the horsepower compared to our competition and still get the same performance, yet ensuring the strength and durability by using epoxy.

 -With twin 350 HP engines, and 400 Gallons of fuel the range is >600m at 25 mph+. If needed, the HammerCat 35 can plane on one 350HP engine. Should you be way offshore, and one engine fails, you can come back at a decent speed. Top speed with twin 350’s is >50 mph. Bigger engines will give more top end speed.

 -The HammerCat 35 is unsinkable: 43 cubic feet of XPS foam ensures that the HammerCat 35 will remain afloat if you hit a container / underwater object.

 -The hardtop of the HammerCat 35 measures 10’ x 12’ and weights just 150 Lbs., so there is no weight high up which can influence the ride in offshore conditions. The hardtop is much larger & wider than on most other center consoles so you and your crew are protected from the sun / elements.

 - The HammerCat is built for longevity using construction techniques normally only seen on offshore racing yachts.

 -Epoxy has three to five times the flexural strength of polyester/ vinylester resins making the HammerCat stronger, more durable, lighter and thus more agile, seaworthy, fuel-efficient and more fun to drive. Epoxy resin is 25 percent stronger than the polyester resin used in most boatbuilding, with higher elongation properties for greater durability.

 -The construction methods and materials employed by Hammer Yachts create stronger, yet lighter hulls that require less horsepower than the competitors and enjoy far better fuel efficiency getting up to twice the miles per gallon of similar boats at speeds of 25-50 mph.

 -The HammerCat 35 has classic timeless lines with her Carolina bow, flared hull and great curves.

You can customize your HammerCat with a large variety of options / different engines / different electronics and much more!  

Below the standard equipment for a new build:

• Tri-color LED navigation light on hardtop + anchor light
• Deck spot light LED, 2 x fore, 2 x aft, mounted in hardtop
• Sound system display in dashboard, Bluetooth capable
• 4 x 300W loudspeakers in hardtop. Blue night-time lights on separate breaker
• 8 x under gunnel courtesy LED lights (blue)
• Steering wheel and Optimus electric steering system
• 3 x battery isolator switches (house battery, 2 x engine battery)
• 1 x house battery 220A gel
• 2 x Engine starter batteries - AGM 110A
• 1 x double waterproof USB charger at helm, 1 x wireless charger at helm
• 2x 200 Gl / 2x 750l aluminum fuel tanks with digital sending units, epoxy coated
• Digital battery display at helm with fuel, water and waste tank senders (if applicable)
• 2 X 350HP dual prop Suzuki engines with display at helm , comes with secondary fuel filters
• 12 X rod holders in gunnel (6 per side)
• Aft facing tackle station under sink- 3 drawers
• Rocket launcher incorporated in hardtop for 8 rods
• Reinforced areas on hardtop for optional outriggers
• 3 x Llebroc helm-seats “SX”at helm
• 6" fold out step at central helm seat for increased height-visibility
• 2 x aft facing Llebroc seats “SX”
• Llebroc bench seat forward of helm, with backrest and folding armrest, 2 x cupholders
• 31 Gl / 117 l fresh water tank with 12V pump
• Sink in aft facing console with faucet
• Carbon fiber dashboard 51" x 18"
• Carbon fiber panel for 12V switches and carbon fiber panel for engine controls
• 2 x storage boxes on aft transom with lids, can be upgraded into live-bait wells or cooler boxes
• 2 x 7' insulated foredeck and 2 x 7' aft deck storage / fish lockers with strut
• 2 x 2' service lockers for access to aft bilge areas, incl 12V LED light, strut
• 2 x 2' fuel tank inspection hatches
• 3 x anchor -bow lockers, 2 struts
• 6 x foldable stainless cleats (bow, midship, stern)
• 6 x cupholders at helm, 2 x cupholders at aft facing seats, 2 x cupholders forward seating
• Carbon fiber hardtop with matt grey painted liner, clear-coat carbon fibre support struts, HammerCat logo
• U-bolt on bow, 2 x U-bolt on stern, 2 x reinforced attachment points at waterline for optional towing bridle
• Integrated fold-out swim ladder on transom
• Bow bollard
• 2 x s/s grab handles on console and 2 x on aft hardtop support struts
• Footrest at helm with Seadeck material
• High tech hand laid & vacuum bagged expoxy hull with closed cell foam for strength and lightweight
• Unsinkable hull
• Removable Marlin door on transom
• Self bailing cockpit
• "Whale" access hatch in port forward storage / fish locker for fishfinder
• Self draining center console with access door, 12V light
• insulated cooler under starboard forward bench, with strutt
• automatic bilge pump in port / starboard aft service lockers with high water indicator at helm
• Rub-rail around vessel
• Painted "snow white" hull with black booth stripe
• Epoxy 'hard" bottom-paint (black)
• Standard Raymarine navigation package with VHF, 2 x 9" MFD chart-plotters, autopilot, GPS & fish-finder
• Horn on hardtop
• Owners manual, NMMA certification
• Freighter delivery Ft. Lauderdale, FL USA*, commissioning and dealer preparation fee, importation